Omeel Coils
Pipodara, Surat, Gujarat
GST No. 24BBBPS5460H1ZN
TrustSEAL Verified
Call 0804607378277% Response Rate
SEND EMAIL

Fin & Tube Heat Exchanger Coils

OMEEL Coils Air Heat Exchangers has been designed to achieve an optimized exchange of thermal energy between air and a fluid
.
The ‘heart’ of our air heat exchangers is the finned coil, built up from a circuit of interconnected tube serpentines and hydrophilic anti-corrosive coated fins to increase the heat exchanging surface. By varying the combination of key design variables (coil materials, coil geometry, casing design) air units are very versatile heat exchangers with a great variety of applications in many industries

Water Cooling Coil

Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
  • Water Cooling Coil
Get Best Quote
Approx. Price: Rs 30,000 / UnitGet Latest Price
Product Brochure

Product Details:

Tube MaterialCopper
Tube Diameter3/4 Inch
Corrosion ResistanceYes
Frame MaterialSS
Country of OriginMade in India
Dimensions2 x 7 Feet

One of the most important tasks is to inspect and clean the cooling coil. An excessive amount of dirt on the coils increases the operating discharge pressure. Systems running with higher-than- normal discharge pressures reduce the life of the compressor, reduce its refrigeration capacity, and consume more energy.
Request
Callback
Send Business Enquiry

Hydrophilic Coating Coil

Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
  • Hydrophilic Coating Coil
Get Best Quote
Approx. Price: Rs 1 Lakh / TONNEGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationPharmaceutical / Chemical Industry
BrandOmeel Coils
ShapeRectangle
Coating TypeHydrophilic Blue
ColorBlue
MaterialStainless Steel, Galvanized

·         Blue Fin aka blue-coated condenser protects itself from accumulation of salt, acid deposits and water droplets, thus prevent corrosion.

·         It improves the heat transfer process, thereby increasing the cooling capacity of the coil.

·         It also helps save the energy used by the air conditioner.

·         Finally, the blue-fin technology enhances the durability and longevity of your coil.

 

Request
Callback
Send Business Enquiry

Hot Water Coil

Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
  • Hot Water Coil
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Power SourceElectric
Usage/ApplicationInduction Heater
MaterialStainless Steel
BrandOmeel coils
Packaging TypeWooden Box
Tube MaterialCopper ,Cupronickel, Brass
Tube Diameter7mm, 1\2'', 5\8'', 3\8''
Country of OriginMade in India

 Tube-and-fin heat exchangers consisting of 1–4 rows with typical entering water temperatures between 120??-180??. As cold air passes across the coil and contacts the hot fin surface, heat transfer occurs

MATERIALS OF CONSTRUCTION

Tubes MOC : Copper ,Cupronickel, Brass

Fin MOC : Aluminum, Copper, Hydrophilic Coated Aluminum, Stainless Steel

Casing : Galvanized Steel, Stainless Steel,Aluminum

Tube OD : 7mm, 1\2’’, 5\8’’, 3\8’’

 

Request
Callback
Send Business Enquiry

Box Type Steam Coil

Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
  • Box Type Steam Coil
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationInduction Heater
MaterialStainless Steel
Packaging TypeWooden Box
Tube MaterialSS
Tube Diameter1\2'', 5\8'', 3\8''
Country of OriginMade in India

These Box type Steam coils are one of the most reliable and efficient quality product which we are providing our clients on a much wider extent in the market. These Box type Jacket Steam coils are highly demand in the market due to their top grad quality. These Box typr Jacket Steam coils are exclusive and are available for our clients at a very easily affordable range of prices for our clients.
Request
Callback
Send Business Enquiry

AHU Chiller Evaporator Coil

AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
  • AHU Chiller Evaporator Coil
Get Best Quote
Approx. Price: Rs 15,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Tube MaterialCopper
CoatingColor Coated
Fin SurfaceCorrugated
BrandOmeel Coils
Corrosion ResistanceYes
TechniqueHot Rolled
Surface TreatmentPowder Coated
ColorSilver

*Omeel Coils - Empowering Cold Room Solutions with Fin and Tube Cold Room Coils*
We are thrilled to introduce our latest innovation, the Fin and Tube Cold Room Coil, crafted to elevate the efficiency and reliability of cold room applications. At Omeel Coils, we have channeled our expertise in the HVAC industry to develop a product that meets the unique demands of cold storage and refrigeration environments, ensuring optimal cooling performance and temperature control.
*Precision Cooling for Cold Rooms:*
The Fin and Tube Cold Room Coil by Omeel Coils are designed to provide precision cooling in cold storage facilities, walk-in freezers, and refrigeration systems. Our coils offer consistent and reliable temperature control, ensuring that perishable goods, pharmaceuticals, and other temperature-sensitive items are kept in an ideal environment to preserve their quality and extend their shelf life.
*Efficient Heat Transfer:*
The key to efficient cold room operations lies in heat transfer capabilities, and our Fin and Tube Cold Room Coils deliver just that. The innovative design, incorporating specially engineered fins and tubes, maximizes the surface area for heat exchange. This results in rapid and efficient cooling, allowing your cold room to reach and maintain the desired low temperatures effectively.
*Customization for Optimal Performance:*
We understand that each cold room project has unique requirements. Our Fin and Tube Cold Room Coils offer a high level of customization, from varying sizes and configurations to different materials suited for specific applications. We collaborate closely with our clients to tailor the coils to their precise needs, ensuring optimal performance and energy efficiency.
*Durability and Longevity:*
Durability is of utmost importance in cold room applications where temperature fluctuations and moisture can pose challenges. Omeel Coils' Fin and Tube Cold Room Coils are built with high-quality materials and advanced manufacturing techniques, ensuring robust construction that can withstand harsh conditions and provide reliable performance for an extended lifespan.
*Energy Efficiency & Cost Savings:*
Our Fin and Tube Cold Room Coils are engineered with energy efficiency in mind, optimizing heat transfer to reduce energy consumption. By lowering the workload on refrigeration systems, our coils contribute to significant cost savings on electricity bills while promoting environmental sustainability.
*Compliance and Quality Assurance:*
Quality and safety are at the forefront of our manufacturing process. Each Fin and Tube Cold Room Coil undergoes stringent quality checks and compliance with industry standards. Our commitment to delivering superior products ensures that you receive a coil that meets the highest quality and performance benchmarks.
*Expert Support & Service:*
Omeel Coils is not just a supplier; we are your dedicated partner in cold room solutions. Our team of experienced professionals is always available to provide technical support, guidance, and assistance. From selecting the right coils for your cold room to installation and maintenance, count on us to be there at every step of your project.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As per Customer Required
Send Business Enquiry

Air Cooled Condenser for AHU Manufacturer

Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
  • Air Cooled Condenser for AHU Manufacturer
Get Best Quote
Approx. Price: Rs 20,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Capacity100 ton
PhaseThree Phase
Number Of FansAs Per Required
Frequency400 hz
BrandOmeel
TechniqueHot Rolled
Voltage240 Volt
Pipe MaterialCopper
Frame MaterialMild Steel

PRODUCT DESCRIPTION

Omeel Coils Pvt. LtdAir handling units are specific to every individual customer needs setting us apart from the commercial manufacturers. Demanding specifications need proper design, engineering and quality built units to work under the most extreme conditions.

 

Omeel Coils Pvt. Ltd builds to accommodate to every customer specific needs, allowing a personal touch to every project. When it comes to critical demand air-handlers we are the source to give you what you need when you need it.

 

(A) SINGLE SKIN :

Omeel Coils Pvt. Ltdserve a wide gamut of single skin air handling unit. Our units are highly efficient and are offered in different sizes covering air capacities from 1000 to 20000 CFM at fixed pressure. We also offer customization services to our clients at reasonable prices.

 

Key Features :

 

Cost efficient

Low power consuming

Reliable and efficient

Long lasting material quality

(B) DOUBLE SKIN :

Omeel Coils Pvt. Ltd serve a wide gamut of single skin air handling unit. Our units are highly efficient and are offered in different sizes covering air capacities from 1000 to 20000 CFM at fixed pressure. We also offer customization services to our clients at reasonable prices.

 

Key Features :

 

Compact, space saving with single /multi centrifugal fan.

Low maintenance.

Tough and strong.

(C) FLOOR MOUNTED :

Omeel Coils Pvt. Ltd offers a wide variety of horizontal floor mounted air handling unit. Manufactured using premium quality G.I sheets, which are powder coated, these are available in various sizes and air covering capacities. Our company uses the best quality fans for our units. These machines are checked on varied parameters to ensure safety and quality.

 

Key Features :

 

Available in single/double Skin construction.

Developed in various configuration.

Self supporting hollow extruded aluminum profile frame for robust construction.

Optional component section.

Specially treated for low noise and vibration free operation.

Rust-free Longer shelf life.

(D) CEILING SUSPENDED :

Omeel Coils Pvt. Ltd We are providing our clients with one of the best quality ceiling air handling units which are manufactured using most robust and strong raw materials. These single skin air handling units are well equipped with all new result oriented accessories.

 

Key Features :

 

Self supporting hollow extruded aluminum profile frame for robust construction.

High quality galvanized steel (powder coated) removal panels. Optional component section.

Specially treated for low noise and vibration free operationand vibration free operation.

Rust-free Longer shelf life.

Applications :

 

Hotel

Hospital

Offices

Malls

Industries

Restaurants

Clubs House

Banquet Halls etc

ACCESSORIES OF AHU :

HEPA FILTERS

MICROVEE FILTER

PLEATED FILTER

ACTIVATED CARBON FILTERS

HIGH PERFORMANCE BAG FILTERS

AIR VOLUME CONTROL DAMPERS

RETURN AIR RISER

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Industrial Compressor Cooler Coil For Steel industries

Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
  • Industrial Compressor Cooler Coil For Steel industries
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Air Tank CapacityMore Than 500 L
Usage/ApplicationChiller Plant
Tube MaterialCopper
CoatingPolished
Motor PowerMore Than 10 HP
Maximum Flow RateMore Than 100 CFM
PressureMore Than 12 Bar
Fin MaterialAluminium
Cooling SystemWater Cooled
Capacity (L/min)45000
Frequency50 Hz
CapacityHigh
ColorAs per need
SizeCustomizable
Country of OriginMade in India

 

PRODUCT DESCRIPTION

Omeel Coils Pvt. Ltd offer high quality Compressor Cooler that is highly appreciated for long lasting life and good performance in air compressors. Prepared using advanced technology, our Compressor Cooler is ideal for air / gas compressor. Compressor cooler is considered as the lung of compressor as its cooling effect directly influences the performance and efficiency of air / gas compressor.

 

PRE COOLER :

Omeel Coils Pvt. Ltdoffer wide range of pre-Cooler. The coolers offered by us are developed by the experts keeping in mind the requirements of the industries. We are one-step ahead of our competitors in manufacturing, exporting and supplying a qualitative range of pre- Coolers. These are precisely engineered to reduce air temperature under extreme conditions. Manufactured from premium quality copper/stainless steel with ends ARC/TIG welded, our coolers are acclaimed for durability and ergonomic design. Our products are acclaimed for high performance and ensure their adherence with the industry standards.

 

INTER COOLER :

Most industrial compressors operating today are a multistage design. To optimize the cost of compressing gases it is popular to use multi-stage industrial compressor. When the Air compressor compresses air, heat is generated this causes the air to expand requiring an increase of HP for further air compression. It's suited between the first & second stage of multistage air compressor. the role of the compressor inter cooler is to provide colder, dryer, denser air to the next stage of compression.

 

Omeel Coils Pvt. Ltd can provide just the intercooler element OR the entire unit including the outer casing.

 

AFTER COOLER :

After coolers are heat exchangers that remove the heat from compressed air. The most common compressor after coolers use much cooler ambient air or cool water to remove the heat, which is also effective in removing moisture from compressed air.

 

We hold expertise in manufacturing and supplying extensive range of an After Coolers that are fabricated with utmost precision. Our products are available in different designs and shapes and satisfy the diverse requirements of the clients efficiently. Our entire product range is in compliance with international standards of quality.

 

Request
Callback


Additional Information:

  • Production Capacity: 10
  • Delivery Time: 45
  • Packaging Details: as per demand
Send Business Enquiry

Industrial AHU Steam Coil

Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
  • Industrial AHU Steam Coil
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
TypeSIU
Power SourceSteam
Powergas
MaterialStainless Steel
BrandOmeel coils
Pipe MaterialCopper
Surface FinishPolished
Usage/ApplicationAHU Unit
ShapeRectangle
Packaging TypeWooden Box
Country of OriginMade in India
Frame MaterialSS

Introduction 

 

We at Omeel Coils are proud to present our latest innovation, the Fin and Tube AHU Steam Coil. Designed with cutting-edge technology and a commitment to excellence, this product is set to revolutionize the air handling unit (AHU) industry. 

 

*Unmatched Efficiency and Performance:*

 

The Fin and Tube AHU Steam Coil offers unmatched efficiency and performance, making it an ideal choice for various heating and cooling applications. The innovative design of the coils ensures maximum heat transfer efficiency, allowing your HVAC systems to operate at optimal levels, saving energy and reducing operational costs.

 

*Robust Construction:*

 

We understand that durability and longevity are essential factors in any HVAC system component. That's why our Fin and Tube AHU Steam Coil is built with high-quality materials and state-of-the-art manufacturing techniques. The robust construction ensures that the coils can withstand rigorous operating conditions and deliver consistent performance over the years.

 

*Customization and Flexibility:*

 

At Omeel Coils, we believe in meeting our customers' unique requirements. Our Fin and Tube AHU Steam Coil can be easily customized to fit specific applications, ensuring seamless integration into your existing HVAC systems. With a range of sizes and configurations available, you can trust us to deliver tailored solutions to meet your heating and cooling needs.

 

*Superior Heat Transfer:*

 

The core of the Fin and Tube AHU Steam Coil lies in its exceptional heat transfer capabilities. The precisely engineered fins and tubes maximize the surface area for heat exchange, ensuring quick and efficient heat transfer between the steam and the surrounding air. This results in rapid heating or cooling, enhancing the overall performance of your AHUs.

 

*Cost-Effectiveness and Energy Savings:*

 

Investing in our Fin and Tube AHU Steam Coil can lead to significant long-term cost savings. By optimizing heat transfer efficiency, your HVAC systems can operate more effectively, reducing energy consumption and subsequently lowering utility bills. Additionally, the extended product lifespan means fewer replacements and maintenance costs over time.

 

*Environmentally Friendly:*

 

We are committed to environmental responsibility. Our Fin and Tube AHU Steam Coil's energy-efficient design aligns with green initiatives, helping you reduce your carbon footprint and contributing to a sustainable future.

 

*Reliability and Support:*

 

Omeel Coils takes pride in providing products that stand the test of time. Our Fin and Tube AHU Steam Coil undergoes rigorous quality checks before leaving our manufacturing facility. We back our products with excellent customer support and a team of experts who are always ready to assist you with any queries or concerns.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Jacket Type Cooling Coil

Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
  • Jacket Type Cooling Coil
Get Best Quote
Approx. Price: Rs 20,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Tube MaterialCopper
CoatingPolished
Cooler TypeAir Cooled
Fin SurfaceCorrugated
Fin MaterialStainless Steel (SS)
Tube Diameter1\2'', 5\8''
Corrosion ResistanceYes
Frame MaterialSS,GI, Aluminum
ShapeRectangle

These Jacket cooling coils are one of the most reliable and efficient quality product which we are providing our clients on a much wider extent in the market. These Jacket cooling coils are highly demand in the market due to their top grad quality. These Jacket cooling coils are exclusive and are available for our clients at a very easily affordable range of prices for our clients.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As per Customer Required
Send Business Enquiry

Fin Tube Type Heating Coil

Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
  • Fin Tube Type Heating Coil
Get Best Quote
Approx. Price: Rs 15,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
TypeSPS
MaterialStainless Steel
Power SourceElectric
Heat Transfer TypeEvaporators/Boilers
ShapeRectangle
Power2.2-400 KW
Flow TypeParallel Flow
ApplicationInduction Heater
Usage/ApplicationHydraulic and Industrial Process
BrandOmeel Coils
Tube MaterialCopper
Tube Diameter3/4 Inch
Fin MaterialAluminium

Introduction 
We at Omeel Coils are proud to present our latest innovation, the Fin and Tube AHU Steam Coil. Designed with cutting-edge technology and a commitment to excellence, this product is set to revolutionize the air handling unit (AHU) industry. 
*Unmatched Efficiency and Performance:*
The Fin and Tube AHU Steam Coil offers unmatched efficiency and performance, making it an ideal choice for various heating and cooling applications. The innovative design of the coils ensures maximum heat transfer efficiency, allowing your HVAC systems to operate at optimal levels, saving energy and reducing operational costs.
*Robust Construction:*
We understand that durability and longevity are essential factors in any HVAC system component. That's why our Fin and Tube AHU Steam Coil is built with high-quality materials and state-of-the-art manufacturing techniques. The robust construction ensures that the coils can withstand rigorous operating conditions and deliver consistent performance over the years.
*Customization and Flexibility:*
At Omeel Coils, we believe in meeting our customers' unique requirements. Our Fin and Tube AHU Steam Coil can be easily customized to fit specific applications, ensuring seamless integration into your existing HVAC systems. With a range of sizes and configurations available, you can trust us to deliver tailored solutions to meet your heating and cooling needs.
*Superior Heat Transfer:*
The core of the Fin and Tube AHU Steam Coil lies in its exceptional heat transfer capabilities. The precisely engineered fins and tubes maximize the surface area for heat exchange, ensuring quick and efficient heat transfer between the steam and the surrounding air. This results in rapid heating or cooling, enhancing the overall performance of your AHUs.
*Cost-Effectiveness and Energy Savings:*
Investing in our Fin and Tube AHU Steam Coil can lead to significant long-term cost savings. By optimizing heat transfer efficiency, your HVAC systems can operate more effectively, reducing energy consumption and subsequently lowering utility bills. Additionally, the extended product lifespan means fewer replacements and maintenance costs over time.
*Environmentally Friendly:*
We are committed to environmental responsibility. Our Fin and Tube AHU Steam Coil's energy-efficient design aligns with green initiatives, helping you reduce your carbon footprint and contributing to a sustainable future.
*Reliability and Support:*
Omeel Coils takes pride in providing products that stand the test of time. Our Fin and Tube AHU Steam Coil undergoes rigorous quality checks before leaving our manufacturing facility. We back our products with excellent customer support and a team of experts who are always ready to assist you with any queries or concerns.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Chilled Water Cooling Coil

Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
  • Chilled Water Cooling Coil
Get Best Quote
Approx. Price: Rs 20,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAhu
Coil TypeChilled Water Coil
MaterialCopper,Stainless Steel,Aluminum
Capacity5-500 TR
Pipe MaterialCopper,Stainless Steel ,Brass
BrandOmeel Coils
TechniqueHot Rolled
Frame MaterialAluminium

 

Tube-and-fin heat exchangers usually consisting of 2–12 rows of tubes that pass through sheets of formed fins bonded through tube expansion

MATERIALS OF CONSTRUCTION

Tubes MOC : Copper ,Cupronickel, Brass

Fin MOC : Aluminum, Copper, Hydrophilic Coated Aluminum, Stainless Steel

Casing : Galvanized Steel, Stainless Steel,Aluminum

Tube OD : 7mm, 1\2’’, 5\8’’, 3\8’’

 

Request
Callback
Send Business Enquiry

Dry Cooler Coil

Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
  • Dry Cooler Coil
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
BrandOmeel Coils
Usage/ApplicationIndustrial
PhaseThree Phase
Voltage380 Volt
Power SourceElectric
Frequency50 Hz
ShapeRectangle
Body MaterialMS

The fluid circulates in multiple passes through the tubes and cooling air flows over the exterior finned surface. They are designed to provide cooling of Water, Ethylene Glycol/Water, and Propylene Glycol/Water solutions in a variety of closed loop applications. Closed loop cooling eliminates the cost of fluid treatment usually associated with the use of cooling towers. The compact plate fin heat transfer surface provides a compact and efficient air cooled fluid cooler. 

 

Request
Callback
Send Business Enquiry

Heresite Cooling Coil

Heresite Cooling Coil
  • Heresite Cooling Coil
  • Heresite Cooling Coil
  • Heresite Cooling Coil
  • Heresite Cooling Coil
  • Heresite Cooling Coil
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

SizeH 3000 x L 6000 mm Size available
Coil TypeAnti corrosive
MaterialGalvanized Steel, Stainless Steel,Aluminum
Tube MaterialCopper,Cupronickel, Brass
Usage/ApplicationAir Handling Unit
Fin MaterialStainless Steel, Aluminium
CoatingHeresite

Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers.The haresite coating become then,and still remains a standard in the industrial coatings industry.We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications..
Request
Callback
Send Business Enquiry

HVAC Cooling Coil

HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
  • HVAC Cooling Coil
Get Best Quote
Approx. Price: Rs 1 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

MaterialCopper
Coil TypeAnti corrosive,Heresite,Chilled water coil
Tube Diameter1\2'',5\8'',3\8''
ThicknessVaries
BrandOmeel Coils
Country of OriginMade in India

Built from the highest-grade materials for optimal performance and long-lasting reliability, our custom commercial coils are designed to match every detail of your existing coil.

Request
Callback
Send Business Enquiry

AHU Cooling Coil

AHU Cooling Coil
  • AHU Cooling Coil
  • AHU Cooling Coil
  • AHU Cooling Coil
Get Best Quote
Approx. Price: Rs 45,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAir Handling Unit
MaterialStainless Steel
Tube MaterialCopper
Fin MaterialAluminium
BrandOmeel Coils
ShapeRectangle,Square
Country of OriginMade in India
Thickness1 -3 mm

We are occupied in offering our clientele a vast assortment of standard quality of AHU Cooling Coils that are highly competent in keeping beverages and food fresh for a long time. All the products offered by are tested and checkered thoroughly following the devised testing parameters to meet set industrial standards and customers exact requirements.


Features:

  • Chilled water coils are tube fin heat exchangers consisting of 2 to 10 rows of tubes. Usually that
  • passes through sheets of formed fins, bonded through tube expansion. Our chilled water coils comes with various
  • tubes & fins materials option like copper, cupro-nickel, aluminum, and stainless steel to match the performance
  • requirements and level of corrosion resistance needed for different application.
  • OMEEL Coils chilled water coils are suitable for use in a wide variety of air cooling and dehumidifying applications. We
  • have the capability to provide you with the exact chilled water coil to meet your rigorous specification. Standard and
  • custom designs are available for new and retrofit installations.
Request
Callback
Send Business Enquiry

Evaporator Coil

Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
  • Evaporator Coil
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

SizeH 3000 x L 6000 mm Size available
Tube MaterialCopper,Cupronickel, Brass
Usage/ApplicationAir Handling Unit
Fin MaterialAluminium, Copper
Frame MaterialSS,GI, Aluminum
Country of OriginMade in India

Designed to be used in air-side applications for cooling, heating and dehumidifying with various circuiting options, as well as face split and intertwined designs.

MATERIALS OF CONSTRUCTION

Tubes MOC : Copper ,Cupronickel, Brass

Fin MOC : Aluminum, Copper, Hydrophilic Coated Aluminum, Stainless Steel

Casing : Galvanized Steel, Stainless Steel,Aluminum

Tube OD : 7mm, 1\2’’, 5\8’’, 3\8’’

 

Request
Callback
Send Business Enquiry

Cooling Coil

Cooling Coil
  • Cooling Coil
  • Cooling Coil
  • Cooling Coil
  • Cooling Coil
  • Cooling Coil
  • Cooling Coil
  • Cooling Coil
Get Best Quote
Approx. Price: Rs 8,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAHU
Tube MaterialAluminium
Corrosion ResistanceYes
Surface TreatmentPowder Coated
ShapeRectangle
Mounting TypeWall Mounted

One of the most important tasks is to inspect and clean the cooling coil. An excessive amount of dirt on the coils increases the operating discharge pressure. Systems running with higher-than- normal discharge pressures reduce the life of the compressor, reduce its refrigeration capacity, and consume more energy.
Request
Callback
Send Business Enquiry

Steam Coil

Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
  • Steam Coil
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
MaterialAluminium
TypeSPS
Power SourceSteam
Power2-400 Kw
Usage/ApplicationHVAC
Tube Diameter3/4 Inch
Tube Thickness14 To 30 Gauge
BrandOmeel Coils

*Omeel Coils - Elevating Efficiency with Fin and Tube Steam Coils*

 

At Omeel Coils, we take pride in presenting our flagship product, the Fin and Tube Steam Coils. As a leading name in the HVAC industry, we have engineered these coils to deliver unparalleled performance, efficiency, and reliability. With our commitment to innovation and excellence, our Fin and Tube Steam Coils are the ideal choice for a wide range of heating and cooling applications.

 

*Efficient Heat Transfer:*

 

The core of our Fin and Tube Steam Coils lies in their exceptional heat transfer capabilities. The innovative design, combining specially engineered fins and tubes, maximizes the surface area for heat exchange. This leads to rapid and efficient heat transfer, allowing your HVAC systems to achieve desired temperatures quickly and maintain them consistently.

 

*Versatility in Applications:*

 

Our Fin and Tube Steam Coils are highly versatile and can be seamlessly integrated into various heating and cooling systems. Whether it's for air handling units, industrial process heating, commercial HVAC systems, or any other application that requires efficient heat exchange, our coils are up to the task.

 

*Customization for Precision:*

 

We understand that each project has unique requirements. Therefore, our Fin and Tube Steam Coils offer a high level of customization. From different sizes and configurations to material choices, we work closely with our clients to tailor the coils precisely to their needs. This level of customization ensures optimal performance and efficiency for your specific applications.

 

*Robust Construction and Durability:*

 

Durability is a key aspect of any HVAC system component. Our Fin and Tube Steam Coils are built with high-quality materials and advanced manufacturing techniques, making them robust and long-lasting. Even in demanding environments, our coils withstand the test of time and continue to deliver reliable performance.

 

*Energy Efficiency & Cost Savings:*

 

By optimizing heat transfer efficiency, our Fin and Tube Steam Coils enhance the overall energy efficiency of your HVAC systems. These coils help reduce energy consumption, resulting in cost savings on utility bills and contributing to a more sustainable approach to heating and cooling.

 

*Quality Assurance & Compliance:*

 

At Omeel Coils, quality is our top priority. Each Fin and Tube Steam Coil undergoes rigorous testing and inspection to ensure it meets our strict quality standards. Our products comply with industry regulations and standards, providing you with peace of mind and confidence in the performance and safety of our coils.

 

*Expert Support & Service:*

 

Omeel Coils is more than just a product supplier; we are your reliable partner in HVAC solutions. Our team of experienced professionals is always ready to provide technical support and assistance. From selecting the right coils for your application to installation and maintenance, we are here to support you every step of the way.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Cold Room Coil

Cold Room Coil
  • Cold Room Coil
  • Cold Room Coil
  • Cold Room Coil
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
CoatingPowder Coated
MaterialAluminium
Usage/ApplicationIndustrial
Tube Thickness2 mm
TechniqueHot Rolled
BrandOmeel Coils
SurfacePowder Coated
Tube Diameter3/4 Inch

*Omeel Coils - Empowering Cold Room Solutions with Fin and Tube Cold Room Coils*

 

We are thrilled to introduce our latest innovation, the Fin and Tube Cold Room Coil, crafted to elevate the efficiency and reliability of cold room applications. At Omeel Coils, we have channeled our expertise in the HVAC industry to develop a product that meets the unique demands of cold storage and refrigeration environments, ensuring optimal cooling performance and temperature control.

 

*Precision Cooling for Cold Rooms:*

 

The Fin and Tube Cold Room Coil by Omeel Coils are designed to provide precision cooling in cold storage facilities, walk-in freezers, and refrigeration systems. Our coils offer consistent and reliable temperature control, ensuring that perishable goods, pharmaceuticals, and other temperature-sensitive items are kept in an ideal environment to preserve their quality and extend their shelf life.

 

*Efficient Heat Transfer:*

 

The key to efficient cold room operations lies in heat transfer capabilities, and our Fin and Tube Cold Room Coils deliver just that. The innovative design, incorporating specially engineered fins and tubes, maximizes the surface area for heat exchange. This results in rapid and efficient cooling, allowing your cold room to reach and maintain the desired low temperatures effectively.

 

*Customization for Optimal Performance:*

 

We understand that each cold room project has unique requirements. Our Fin and Tube Cold Room Coils offer a high level of customization, from varying sizes and configurations to different materials suited for specific applications. We collaborate closely with our clients to tailor the coils to their precise needs, ensuring optimal performance and energy efficiency.

 

*Durability and Longevity:*

 

Durability is of utmost importance in cold room applications where temperature fluctuations and moisture can pose challenges. Omeel Coils' Fin and Tube Cold Room Coils are built with high-quality materials and advanced manufacturing techniques, ensuring robust construction that can withstand harsh conditions and provide reliable performance for an extended lifespan.

 

*Energy Efficiency & Cost Savings:*

 

Our Fin and Tube Cold Room Coils are engineered with energy efficiency in mind, optimizing heat transfer to reduce energy consumption. By lowering the workload on refrigeration systems, our coils contribute to significant cost savings on electricity bills while promoting environmental sustainability.

 

*Compliance and Quality Assurance:*

 

Quality and safety are at the forefront of our manufacturing process. Each Fin and Tube Cold Room Coil undergoes stringent quality checks and compliance with industry standards. Our commitment to delivering superior products ensures that you receive a coil that meets the highest quality and performance benchmarks.

 

*Expert Support & Service:*

 

Omeel Coils is not just a supplier; we are your dedicated partner in cold room solutions. Our team of experienced professionals is always available to provide technical support, guidance, and assistance. From selecting the right coils for your cold room to installation and maintenance, count on us to be there at every step of your project.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Square Compressor cooler coil

Square Compressor cooler coil
  • Square Compressor cooler coil
  • Square Compressor cooler coil
  • Square Compressor cooler coil
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Tube MaterialCopper
Usage/ApplicationIndustrial
SizeCustomizable
Fin MaterialAluminium, Copper
ColorAs per need
CapacityHigh

We, Omeel coils offers wide range of shell and tube Square type compressor cooler coils that are used for various applications by many of our clients. We make customisable coils to meet our customers needs which provides high performance with low maintenance and saves energy. We made this products using international quality standards with premium quality of raw material to meet the customer's satisfaction.
Request
Callback
Send Business Enquiry

Thermal Oil Coil

Thermal Oil Coil
  • Thermal Oil Coil
  • Thermal Oil Coil
Get Best Quote
Approx. Price: Rs 25,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAHU
Tube MaterialCopper
BrandOmeel
Fin MaterialAluminium
Tube Diameter3/8 Inch
Fins Spacing5 to 12 FPI

We hold the proficiency to offer a variety of Thermal Oil Coils that are extensively used in downstream of boiler bank to preheat the feed water. These products are always water tube type that has different types of tubes for different applications. Our industrious professionals precisely engineer these products as per the necessities of the clients adhering to strict quality standard.

Request
Callback


Additional Information:

  • Item Code: TO-64
Send Business Enquiry

AHU Coil

AHU Coil
  • AHU Coil
  • AHU Coil
  • AHU Coil
  • AHU Coil
Get Best Quote
Approx. Price: Rs 10,000 / UnitGet Latest Price
Product Brochure

Product Details:

Tube MaterialCopper
Surface FinishPaint Coated
Surface TreatmentPowder Coated
Pressure4.5 Mpa
Frame MaterialMild Steel

OMEEL COILS designs and manufactures coils for new installations, for wide ranges of applications from industrial process to AHU comfort conditioning. These coils are available in any shape or size and fabricated from a variety of materials.

Request
Callback
Send Business Enquiry

DX Cooling Coil

DX Cooling Coil
  • DX Cooling Coil
  • DX Cooling Coil
  • DX Cooling Coil
  • DX Cooling Coil
Get Best Quote
Approx. Price: Rs 80,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAHU
Tube MaterialCopper,Cupronickel, Brass
Frame MaterialSS,GI, Aluminum
Corrosion ResistanceYes
Country of OriginMade in India
ShapeRectangle
Dimensions ExternalH 3000 x L 6000 mm Size available

DX coils are an ideal cooling solution for VRV(F) units or third-party DX cooling systems, as they are filled with coolant which evaporates and thus allows the coil to function as a cooling coil. This process needs to occur in a cooling circuit driven by a cooling compressor.

MATERIALS OF CONSTRUCTION

Tubes MOC : Copper ,Cupronickel, Brass

Fin MOC : Aluminum, Copper, Hydrophilic Coated Aluminum, Stainless Steel

Casing : Galvanized Steel, Stainless Steel,Aluminum

Tube OD : 7mm, 1\2’’, 5\8’’, 3\8’’

 

Request
Callback
Send Business Enquiry

Evaporator DX Coil

Evaporator DX Coil
  • Evaporator DX Coil
  • Evaporator DX Coil
  • Evaporator DX Coil
Get Best Quote
Approx. Price: Rs 15,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationHVAC
Tube MaterialCoper
Fin MaterialStainless Steel
Size2 x 5 Feet
ShapeRectangle

AHU DX Coil
Request
Callback
Send Business Enquiry

Condenser Coil

Condenser Coil
  • Condenser Coil
  • Condenser Coil
  • Condenser Coil
  • Condenser Coil
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAHU
MaterialStainless Steel
BrandOmeel Coils
Pipe MaterialCopper ,Cupronickel, Brass
Plate Thickness3 mm
Pipe Diameter7mm, 1\2'', 5\8'', 3\8''
ShapeRectangle
Fin MaterialAluminum, Copper, Hydrophilic Coated Aluminum, Stainless Steel

Built to rigorous specifications for efficient heat transfer that's ideal for outdoor use. We place an emphasis on brazed connections to combat thermal expansion, as well as harsh environments.

 

Request
Callback
Send Business Enquiry

Industrial Air Cooled Chiller Coil

Industrial Air Cooled Chiller Coil
  • Industrial Air Cooled Chiller Coil
  • Industrial Air Cooled Chiller Coil
  • Industrial Air Cooled Chiller Coil
  • Industrial Air Cooled Chiller Coil
  • Industrial Air Cooled Chiller Coil
Get Best Quote
Approx. Price: Rs 70,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Tube MaterialCopper
Tube Diameter3/8, 1/2 , 5/8
Thickness18 swg- 22 swg
Corrosion ResistanceYes
Frame MaterialMild Steel
Country of OriginMade in India
Surface FinishPaint Coated
DimensionsCustomizes
Mounted TypeWall Mounted

Ahu Chiiled water coil
Request
Callback


Additional Information:

  • Delivery Time: 20
  • Packaging Details: as per demand
Send Business Enquiry

Box Type Cooling Coil

Box Type Cooling Coil
  • Box Type Cooling Coil
  • Box Type Cooling Coil
  • Box Type Cooling Coil
  • Box Type Cooling Coil
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Tube MaterialSS
Fin MaterialAluminium, Copper, Stainless Steel
MaterialGalvanized Steel,Stainless Steel,Aluminum
Coil TypeSS Cooling Coil
SizeH 3000 x L 6000 mm Size available
Usage/ApplicationIndustrial
Country of OriginMade in India

These Box type Cooling coils are one of the most reliable and efficient quality product which we are providing our clients on a much wider extent in the market. These Box type Jacket Cooling coils are highly demand in the market due to their top grad quality. These Box typr Jacket Cooling coils are exclusive and are available for our clients at a very easily affordable range of prices for our clients.
Request
Callback
Send Business Enquiry

Special Coating Coil

Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
  • Special Coating Coil
Get Best Quote
Approx. Price: Rs 1 Lakh / NosGet Latest Price
Product Brochure

Product Details:

ThicknessVaries
MaterialSS
BrandOmeel Coils
ColorRed, Green,Blue
ShapeRactangle
Country of OriginMade in India

Special Coating Coil For Different Application.
Request
Callback
Send Business Enquiry

Ammonia Gas Coils

Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
  • Ammonia Gas Coils
Get Best Quote
Approx. Price: Rs 35,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Compatible BrandTata
Usage/ApplicationIndustrial
Automation GradeAutomatic
PhaseSingle Phase
Frequency50 Hz
MaterialSS
Voltage240 Volt
Country of OriginMade in India
Pipe Diameter3/4 Inch
Length25 Feet

,*Introducing Omeel Coils' Low Temperature Units: Precision Cooling for Specialized Applications*

 

At Omeel Coils, we are delighted to introduce our latest innovation, the Low Temperature Units. These cutting-edge cooling solutions are designed to cater to specialized applications that require precise temperature control and reliability in extreme low-temperature environments. With our expertise in the HVAC industry, we have developed a product that meets the demands of diverse industries and applications, ensuring optimal performance and efficiency.

 

*Exceptional Cooling Performance:*

 

Our Low Temperature Units are engineered to deliver exceptional cooling performance, even in the most challenging conditions. Whether you need to maintain sub-zero temperatures for research laboratories, pharmaceutical storage, food processing, or any other specialized application, our units guarantee reliable and consistent cooling.

 

*Customized Solutions:*

 

At Omeel Coils, we understand that every application has unique requirements. Our Low Temperature Units offer unparalleled flexibility and can be customized to meet specific cooling needs. From capacity adjustments to additional features, we work closely with our clients to tailor the units precisely to their requirements, ensuring seamless integration with their existing systems.

 

*Energy Efficiency & Sustainability:*

 

We take pride in our commitment to environmental responsibility. Omeel Coils' Low Temperature Units are designed with energy efficiency in mind. By utilizing advanced technologies and optimizing the cooling process, our units help you reduce energy consumption and operating costs, while also contributing to a greener and more sustainable future.

 

*Reliable and Durable:*

 

Reliability is paramount in low-temperature applications, where temperature fluctuations can have critical consequences. Our Low Temperature Units are constructed using high-quality materials and undergo rigorous testing to ensure durability and long-lasting performance. You can rely on our units to maintain precise temperatures consistently and protect your valuable products and equipment.

 

*Advanced Control and Monitoring:*

 

Our Low Temperature Units come equipped with advanced control and monitoring systems, providing you with precise temperature regulation and real-time performance data. The user-friendly interface allows for easy adjustments and ensures that your cooling system operates at its optimal settings.

 

*Safety Features:*

 

Safety is of utmost importance when dealing with low-temperature applications. Our units are equipped with state-of-the-art safety features to protect against potential issues such as temperature deviations, power failures, and system malfunctions. You can have peace of mind knowing that your valuable assets are safeguarded.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As per Customer Required
Send Business Enquiry

SS Cooling Coil For Air Handling unit

SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
  • SS Cooling Coil For Air Handling unit
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationAhu
Tube MaterialSS
BrandOmeel Coils
Coil TypeChilled Water Coil
MaterialGalvanized Steel, Stainless Steel,Aluminum
Country of OriginMade in India

These SS cooling coils are one of the most reliable and efficient quality product which we are providing our clients on a much wider extent in the market. These SS cooling coils are highly demand in the market due to their top grad quality. These SS cooling coils are exclusive and are available for our clients at a very easily affordable range of prices for our clients.
Request
Callback
Send Business Enquiry
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Omeel Coils (Sales Coordinator)
Omeel Coils
Plot No. 18, 19 & 20, Near Kim Chokdi, Opposite Bhagyoday Hotel, National Highway No. 08, Village Pipodara, Tal. Mangrol
Surat - 394110, Gujarat, India


Call Us


Send E-mail