Omeel Coils
Pipodara, Surat, Gujarat
GST No. 24BBBPS5460H1ZN
TrustSEAL Verified
Call 0804607378279% Response Rate
SEND EMAIL

Shell & Tube Heat Exchanger

OMEEL Coils Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas applications such as oil cooling, condensing, jacket water or gas cooling.

Heat Exchangers in this category include:

Condenser

Evaporators

Oil Coolers

Compressor Coolers

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution.

Heat exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead times and compatibility with further orders and re-builds.

Shell And Tube Water Cooled Condenser

Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Capacity25 ton
PhaseThree Phase
Heat Transfer TypeCondensers
Medium UsedWater
ShapeCylindrical
BrandOmeel Coils
MaterialCopper
Casing MaterialMild Steel
Liquid Flow Rate450 LPM
Surface FinishBright
ModelOCWC-100
Power SupplyNil
Tube Diameter5 Inch
Dimension400 OD - Length- 2200 mm
ColorGrey
Motor PowerNil
Working Pressure40 BAR
Coil TubesCopper
Refrigerant OutletNil
Weight300Kg
I Deal InNew Only
Tube Length5 Feet
Country of OriginMade in India

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback


Additional Information:

  • Item Code: OCWC-100
  • Production Capacity: 10 TR - 500TR
  • Delivery Time: 30days
  • Packaging Details: Wooden pallet
Send Business Enquiry

Shell And Tube Water Cooled Condenser

Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
  • Shell And Tube Water Cooled Condenser
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

Capacity25 ton
PhaseThree Phase
Usage/ApplicationFor Power Plant
BrandAlfa Laval
Casing MaterialGalvanized power coated
Outlet Temperature35 to + 55 deg C
RefrigerationR22 R404A
Length2 Feet

Shell Tube Condenser is also known as heat exchanger as it works for exchanging the heat from fluid. Two fluids at different temperature exchange heat with each other. Condenser is mainly used in industries like refineries, textile industries, solvent extraction plant, chemical plants etc. The Tubes are expanded and welded that avoids unnecessary detonation of pipe.
Request
Callback
Send Business Enquiry

Industrial Cooler SS Tube Bundle

Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
  • Industrial Cooler SS Tube Bundle
Get Best Quote
Approx. Price: Rs 52,000 / UnitGet Latest Price
Product Brochure

Product Details:

Part TypeExchanger Tube
Usage/ApplicationIndustrial
MaterialMild Steel
Size Diameter1 Inch
Exchanger TypeShell & Tube
Surface TreatmentPowder Coated
Length20 Feet

Our company has earned accolades in offering Industrial Cooler SS Tube Bundle to the clients. This product can be avail in different sizes, dimensions and other specifications to suit clients' variegated requirements and gain optimum satisfaction.
Request
Callback
Send Business Enquiry

Cu-Ni 70 30 Tube Bundle

Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
  • Cu-Ni 70 30 Tube Bundle
Get Best Quote
Approx. Price: Rs 80,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Usage/ApplicationHVAC industry
MaterialCupronickel
Size Diameter1/2 Inch
Surface TreatmentPolished
Length2 Feet

*The Tube Bundle with CU:Ni (Cupronickel) - Uncompromising Performance and Corrosion Resistance*
At Omeel Coils, we are delighted to present our high-performance Tube Bundle crafted with CU:Ni (Cupronickel) material, a powerful combination of copper and nickel. This innovative tube bundle solution offers exceptional corrosion resistance, superior heat transfer capabilities, and durability, making it an ideal choice for a wide range of demanding industrial and marine applications.
*The Power of Cupronickel:*
CU:Ni, or Cupronickel, is a unique alloy consisting of copper and nickel in varying proportions. The blend of these two metals results in an exceptional material that brings together the best of both worlds. Copper ensures excellent thermal conductivity and malleability, while nickel enhances the alloy's corrosion resistance properties, even in harsh and corrosive environments.
*Corrosion Resistance for Challenging Environments:*
One of the most significant advantages of the CU:Ni Tube Bundle is its outstanding resistance to corrosion. This feature makes it highly suitable for applications in marine environments, chemical processing plants, offshore platforms, and other industrial settings where exposure to saltwater, chemicals, and aggressive agents can lead to premature degradation of traditional materials.
*Superior Heat Transfer Efficiency:*
The Tube Bundle's design, coupled with the exceptional thermal conductivity of copper, ensures superior heat transfer efficiency. This feature is vital for heat exchanger applications where optimal heat exchange performance directly impacts the overall efficiency and energy consumption of the system.
*Durability and Longevity:*
The combination of copper and nickel in the CU:Ni Tube Bundle results in a highly durable and long-lasting solution. The alloy's resistance to corrosion, erosion, and wear ensures that the tube bundle can withstand the test of time, even in demanding operating conditions, thus reducing maintenance and replacement costs.
*Wide Range of Applications:*
The versatility of the CU:Ni Tube Bundle makes it suitable for a wide range of industries and applications. Whether it's for seawater desalination plants, power generation facilities, oil refineries, or chemical processing, this tube bundle solution excels in diverse settings where resistance to corrosion and efficient heat transfer are crucial.
*Compliance and Quality Assurance:*
At Omeel Coils, quality is our priority. Our CU:Ni Tube Bundle undergoes stringent quality checks and adheres to industry standards and certifications. We ensure that our products meet the highest levels of performance and reliability, giving our customers confidence in the durability and efficiency of our tube bundle solutions.
*Expert Support & Service:*
As your trusted HVAC partner, we provide expert technical support and guidance throughout your project. Our team of experienced professionals is available to assist you in selecting the right CU:Ni Tube Bundle for your specific requirements and offer support during installation and maintenance processes.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 days
  • Packaging Details: As per Customer Required
Send Business Enquiry

Cu Ni Tube Bundle

Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
  • Cu Ni Tube Bundle
Get Best Quote
Approx. Price: Rs 15,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Part TypeFinned Tubes
Usage/ApplicationHVAC industry
Size/Dimension3 feet
MaterialCupronickel
Surface TreatmentPowder Coated
Tube Diameter3/4 Inch
TechniqueHot Rolled

*The Tube Bundle with CU:Ni (Cupronickel) - Uncompromising Performance and Corrosion Resistance*
At Omeel Coils, we are delighted to present our high-performance Tube Bundle crafted with CU:Ni (Cupronickel) material, a powerful combination of copper and nickel. This innovative tube bundle solution offers exceptional corrosion resistance, superior heat transfer capabilities, and durability, making it an ideal choice for a wide range of demanding industrial and marine applications.
*The Power of Cupronickel:*
CU:Ni, or Cupronickel, is a unique alloy consisting of copper and nickel in varying proportions. The blend of these two metals results in an exceptional material that brings together the best of both worlds. Copper ensures excellent thermal conductivity and malleability, while nickel enhances the alloy's corrosion resistance properties, even in harsh and corrosive environments.
*Corrosion Resistance for Challenging Environments:*
One of the most significant advantages of the CU:Ni Tube Bundle is its outstanding resistance to corrosion. This feature makes it highly suitable for applications in marine environments, chemical processing plants, offshore platforms, and other industrial settings where exposure to saltwater, chemicals, and aggressive agents can lead to premature degradation of traditional materials.
*Superior Heat Transfer Efficiency:*
The Tube Bundle's design, coupled with the exceptional thermal conductivity of copper, ensures superior heat transfer efficiency. This feature is vital for heat exchanger applications where optimal heat exchange performance directly impacts the overall efficiency and energy consumption of the system.
*Durability and Longevity:*
The combination of copper and nickel in the CU:Ni Tube Bundle results in a highly durable and long-lasting solution. The alloy's resistance to corrosion, erosion, and wear ensures that the tube bundle can withstand the test of time, even in demanding operating conditions, thus reducing maintenance and replacement costs.
*Wide Range of Applications:*
The versatility of the CU:Ni Tube Bundle makes it suitable for a wide range of industries and applications. Whether it's for seawater desalination plants, power generation facilities, oil refineries, or chemical processing, this tube bundle solution excels in diverse settings where resistance to corrosion and efficient heat transfer are crucial.
*Compliance and Quality Assurance:*
At Omeel Coils, quality is our priority. Our CU:Ni Tube Bundle undergoes stringent quality checks and adheres to industry standards and certifications. We ensure that our products meet the highest levels of performance and reliability, giving our customers confidence in the durability and efficiency of our tube bundle solutions.
*Expert Support & Service:*
As your trusted HVAC partner, we provide expert technical support and guidance throughout your project. Our team of experienced professionals is available to assist you in selecting the right CU:Ni Tube Bundle for your specific requirements and offer support during installation and maintenance processes.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Heat Exchanger Tube Bundle

Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
  • Heat Exchanger Tube Bundle
Get Best Quote
Approx. Price: Rs 25,000 / PieceGet Latest Price
Product Brochure

Product Details:

Part TypeExchanger Tube
Usage/ApplicationIndustrial
Surface TreatmentPowder Coated
MaterialCopper
Size Diameter3/4'',5/8'',1/2''

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

12 Feet Naval Brass Tube Bundle

12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
  • 12 Feet Naval Brass Tube Bundle
Get Best Quote
Approx. Price: Rs 80,000 / UnitGet Latest Price
Product Brochure

Product Details:

MaterialCopper
Usage/ApplicationIndustrial
Size Diameter15 Inch
Exchanger TypeShell & Tube
Length12 Feet

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.

Request
Callback
Send Business Enquiry

Shell And Tube DX Evaporators Coil

Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
  • Shell And Tube DX Evaporators Coil
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationIndustrial
MaterialMild Steel
BrandOmeel Coils
DesignCustomized
Tube Outer Diameter1/2'',3/4'',5/8''
LengthVeries
Country of OriginMade in India

shell-and-tube type evaporators are very efficient and require minimum floor space and headspace. These are easy to maintain, hence they are very widely used in medium to large capacity refrigeration systems.

We offer a premium range of shell and tube type chiller. This has wide applications for comfort / industrial A.C. plants, process water / other fluids chilling plants. These chillers are manufactured by using the latest technology and can withstand high pressure and temperature.
Request
Callback
Send Business Enquiry

Industrial Air Cooled Heat Exchanger

Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
  • Industrial Air Cooled Heat Exchanger
Get Best Quote
Approx. Price: Rs 10,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Heat Transfer TypeCondensers
Usage/ApplicationAutomobile Industry
TypeCoil
FrequencyCustomise
VoltageCustomise
Flow TypeParallel Flow
Surface FinishCoated
Brandomeel coils

PRODUCT DESCRIPTION

Omeel Coils Pvt. Ltd Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas applications such as oil cooling, condensing, jacket water or gas cooling.

MATERIALS

Only quality materials from reputable suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tubes, and tube plates. Material selection is subject to operating parameters and conditions of use.

 

CONDENSER | EVAPORATORS | OIL COOLERS | COMPRESSOR COOLERS

Every effort is put in to providing the optimum design of heat exchanger for our client's conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution.

 

Heat exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger's materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead times and compatibility with further orders and re-builds.

 

ADDITIONAL SERVICES

Our workshop staff has over 12 years of experience in the manufacturing and re-building of Heat Exchangers and we have the ability to clean, test, repair and re-building/re-tube Shell and Tube Heat exchangers.

 

QUALITY :

All units are supplied with full material certification and are pressure tested at our workshop. Heat exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing. We can arrange for third party inspection/witness from most of the internationally recognized independent classification societies.

 

Whether your need is for a custom designed Shell & Tube Heat Exchanger, de-scale and test, repair or re-tube then just contact us and we'll be pleased to help.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Shell And Tube Type Evaporator

Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
  • Shell And Tube Type Evaporator
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
Usage/ApplicationFor Pharmaceutical Industry
Medium UsedOil
BrandAlfa Laval
Tube Outer Diameter15 Inch
LengthVeries

shell-and-tube type evaporators are very efficient and require minimum floor space and headspace. These are easy to maintain, hence they are very widely used in medium to large capacity refrigeration systems.

We offer a premium range of shell and tube type chiller. This has wide applications for comfort / industrial A.C. plants, process water / other fluids chilling plants. These chillers are manufactured by using the latest technology and can withstand high pressure and temperature.

Request
Callback
Send Business Enquiry

Shell And Tube Oil Cooler

Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
  • Shell And Tube Oil Cooler
Get Best Quote
Approx. Price: Rs 2,000 / UnitGet Latest Price
Product Brochure

Product Details:

Cooler MaterialMild Steel
Usage/ApplicationIndustrial
Pressure35 kg/cm2
Surface TreatmentPaint Coated
Country of OriginMade in India

We present a broad range of Shell and Tube Oil Cooler and heat exchangers, which are made-up using qualitative raw materials. Extensively used in heat exchanging process as it contains bundles of tubes inside the cylindrical shell as it increases the thermal efficiency. Known for its dependable performance and durability, our range is offered in tailored solutions to serve the necessities of our clients. Furthermore, we make the supply of these coolers at affordable price tags in durable packaging.

Features:

  • Sturdy design
  • High efficiency
  • Rust-proof finishing
Request
Callback
Send Business Enquiry

Heat Exchangers For Petrochemical plants

Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
  • Heat Exchangers For Petrochemical plants
Get Best Quote
Approx. Price: Rs 40,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Heat Transfer TypeCondensers
MaterialMetal
Usage/ApplicationFor Pharma Industry
Flow TypeParallel Flow
BrandOmeel Coils
Tank CapacityAs per demand
Water inletYes
i Pure TechnologyYes
Country of OriginMade in India

  • We offer naptha air cooler, oil refineries, petrochemical plants and chemical plants have extensive requirements of heat exchangers for heating, cooling, condensation and heat recovery. Due to accute shortage of water, many of these heat exchangers
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: As Per Required
  • Packaging Details: As per Required
Send Business Enquiry

Mild Steel Corrogeted Tube Heat Exchanger

Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
  • Mild Steel Corrogeted Tube Heat Exchanger
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationFood Process Industry
Medium UsedWater
MaterialMild Steel
BrandOmeel Coils
Primary Exchanger MaterialSteel
SizeAs per demand

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

Ammonia Condenser for industrial purpose

Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
  • Ammonia Condenser for industrial purpose
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Body MaterialMild Steel
MaterialMild Steel,SS,CS
Usage/ApplicationIndustrial
BrandOmeel Coils
Resistance Temperature400 deg C
Medium TypeWater
Pressure0.1-10Mpa
ShapeCylindrical
Country of OriginMade in India

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

Industrial Shell And Tube Heat Exchangers

Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
  • Industrial Shell And Tube Heat Exchangers
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
Usage/ApplicationFor Food Processing Industry
Medium UsedOil
BrandAlfa Laval
Outlet Temperature275 deg C
Tube Diameter15 Inch
Inlet Temperature95 deg C
Surface FinishColor Coated
Length4 Feet


Features

  1. v  Highly durable
  2. v  Low maintenance
  3. v  Easy to install
  4. v  Fine-finish
  5. v  Sturdy construction
  6. v  Leak proof joints
  7. v  Rust preventive primer finish of red oxide paint
  8. v  Specialized construction material and / or testing producers can be used.

 

Request
Callback
Send Business Enquiry

Fin Engine Oil Cooler

Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
  • Fin Engine Oil Cooler
Get Best Quote
Approx. Price: Rs 25,000 / UnitGet Latest Price
Product Brochure

Product Details:

Cooler MaterialTitanium
Usage/ApplicationIndustrial
Cooling TypeWater Cooled
ShapeRectangle
Type of coolingOil Cooled
Tube Diameter1/2'', 5/8'', 3/4''
Country of OriginMade in India

An early design known for its low oil-side pressure drop and multi-directional fin access for easy
installations. The air fin is mechanically bonded and the tubes are Arc, Gas or TIG welded together, forming a cross-tube and header design. Flexibility is the significant advantage of this cooler design as it can be adapted to most applications by varying the length, height, fin density and tube diameters.
Request
Callback
Send Business Enquiry

Steam Tubular Heat Exchangers

Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
  • Steam Tubular Heat Exchangers
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationFood Process Industry
TypeCoil
Medium UsedWater
Surface FinishCoated
BrandOmeel Coils
SizeAs per requirement
Country of OriginMade in India

 The steam-heat exchanger requires an adequate steam supply, which may require a steam generator depending on the rig's steam supply. Steam enters the vessel through an automatic control valve. Heat from the steam is transferred to the vessel's internal tubing bundle and, in turn, the effluent passing through it.

Request
Callback
Send Business Enquiry

Process Chiller Condenser Shell & Tube Heat Exchanger

Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
  • Process Chiller Condenser Shell & Tube Heat Exchanger
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
BrandOmeel Coils
Usage/ApplicationIndustrial
Capacity15
ColorSilver
Body MaterialMild Steel
Surface FinishPaint Coated
MediaWater
LengthAs per demand
Diameter12 Inch

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

Shell & Tube Lube Oil Cooler

Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
  • Shell & Tube Lube Oil Cooler
Get Best Quote
Approx. Price: Rs 20,000 / PieceGet Latest Price
Product Brochure

Product Details:

Pressure35 kg/cm2
TypeAir-Cooled
Cooler MaterialMild Steel
Cooling TypeWater Cooled
Flow RateUp to 2000 lpm
Usage/ApplicationFood Process Industry
Country of OriginMade in India

Lubricating oil coolers take hot oil from an engine or a machine, remove excess heat and return the cooled oil to the equipment. They ensure that lubricating oil doesn’t exceed the permitted temperature. The lube oil cooler can be either air or water cooled. Either way, it’s a highly effective oil-cooling heat exchanger.

Request
Callback
Send Business Enquiry

Ammonia Evaporator for Industrial

Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
  • Ammonia Evaporator for Industrial
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
Capacity100 Ton
Usage/ApplicationIndustrial Use
BrandOmeel Coils
Country of OriginMade in India

These are specially designed Atmospheric Condensers which condense ammonia into liquid state from gaseous state. The robustly constructed ammonia base Atmospheric Condensers that we offer are of high efficiency and durability. 
Request
Callback
Send Business Enquiry

Process Chiller Evaporator

Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
  • Process Chiller Evaporator
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationPharmaceutical industry
MaterialMS,SS,GA
Medium UsedWater
BrandOmeel Coils
SizeVaries
ColorWhite
Country of OriginMade in India

shell-and-tube type evaporators are very efficient and require minimum floor space and headspace. These are easy to maintain, hence they are very widely used in medium to large capacity refrigeration systems.

We offer a premium range of shell and tube type chiller. This has wide applications for comfort / industrial A.C. plants, process water / other fluids chilling plants. These chillers are manufactured by using the latest technology and can withstand high pressure and temperature.
Request
Callback
Send Business Enquiry

CIAT Heat Exchanger

CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
  • CIAT Heat Exchanger
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2 Piece
MaterialMild Steel
Heat Transfer TypeCondensers
Usage/ApplicationFor Pharma Industry
Flow TypeParallel Flow
BrandAlfa Laval
Country of OriginMade in India

Features

  1. v  Highly durable
  2. v  Low maintenance
  3. v  Easy to install
  4. v  Fine-finish
  5. v  Sturdy construction
  6. v  Leak proof joints
  7. v  Rust preventive primer finish of red oxide paint
  8. v  Specialized construction material and / or testing producers can be used.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: As per requirement
  • Packaging Details: As per requirement
Send Business Enquiry

Stainless Steel Heat Exchanger For chemical plant

Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
  • Stainless Steel Heat Exchanger For chemical plant
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationPharmaceutical industry
TypeSteam heat exchanger
Medium UsedSteam,Gas,Air,Water
BrandAlfa Laval
SizeAs per requirment

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

SS 316L Heat Exchanger

SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
  • SS 316L Heat Exchanger
Get Best Quote
Approx. Price: Rs 45,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialSS 316L
Heat Transfer TypeCondensers
Usage/ApplicationPharmaceutical industry
TypeSteam heat exchanger
Medium UsedSteam,Gas,Air,Water
BrandOmeel Coils
SizeAs per requirment

The amount of stainless steel 316L utilized in heat exchanger equipment is increasing as industry strives toward greater efficiency and reduced costly shutdowns in its operations and higher product purity.As will be shown,stainless steel 316L is sometimes the only material that can be used;in other situations it is the most economical when costs of installation,Maintenance and production stoppages are considered.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Double Wall Plate Heat Exchanger Ss304

Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
  • Double Wall Plate Heat Exchanger Ss304
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Part TypeExchanger Tubes
MaterialSS 304
Usage/ApplicationPharmaceutical industry
TypeSteam heat exchanger
Medium UsedSteam,Gas,Air,Water
BrandOmeel Coils

The amount of stainless steel 304 utilized in heat exchanger equipment is increasing as industry strives toward greater efficiency and reduced costly shutdowns in its operations and higher product purity.As will be shown,stainless steel 304 is sometimes the only material that can be used;in other situations it is the most economical when costs of installation,Maintenance and production stoppages are considered.
Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Duplex Steel Heat Exchanger

Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
  • Duplex Steel Heat Exchanger
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialDuplex steel
BrandOmeel Coils
Usage/ApplicationPharmaceutical industry
TypeSteam heat exchanger
Medium UsedSteam,Gas,Air,Water

The manufacture of chemicals, petrochemicals, and oil & gas derivatives can expose processing equipment to highly corrosive fluids. Careful analysis of fluids, pressures, processes and manufacturing temperatures have shown Duplex Stainless Steel Heat Exchangers can be highly corrosion resistant in many of these extremely harsh environments.

When these aggressive fluids come into contact with interior surfaces of the process equipment, proper consideration must be given to the effects of the chemistry on the material of construction. When this occurs, repair and/or replacement of equipment will be needed, causing unwanted costly and disruptive downtime of the process line.

A Duplex Stainless Steel Heat Exchanger from Omeel Coils is extremely effective against to localized corrosion, cracking, and stress corrosion. Specification of Duplex Stainless Steel as the material of construction offers a long-term and cost-effective method of preventing damaging corrosion and eliminating subsequent leaks to the process during manufacture.

Request
Callback
Send Business Enquiry

Brass Tube Oil Cooler

Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
  • Brass Tube Oil Cooler
Get Best Quote
Approx. Price: Rs 20,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Capacity10000 ltr
Usage/ApplicationIndustrial
Pressure15-30 bar
Cooler MaterialBrass
Voltage280 Volt
PhaseSingle Phase
Length3 Feet
Tube Diameter1/2 Inch
Power SourceElectric

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: as Per Customer Required
Send Business Enquiry

Compressor Oil Cooler

Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
  • Compressor Oil Cooler
Get Best Quote
Approx. Price: Rs 20,000 / UnitGet Latest Price
Product Brochure

Product Details:

BrandOmeel Coils
Usage/ApplicationIndustrial
Frequency50 Hz
PhaseSingle Phase
Power SourceElectric
ShapeRectangle
Voltage240 Volt
Power2 HP
Material for ConstructionStainless Steel
Country of OriginMade in India

Ø  The coolers offered by us are developed by the experts keeping in mind the requirements of the industries.
We are one-step ahead of our competitors in manufacturing, exporting and supplying a qualitative range of pre- Coolers. These are precisely engineered to reduce air temperature under extreme conditions. Manufactured from premium quality copper/stainless steel with ends ARC/TIG welded, our coolers are acclaimed for durability and ergonomic design. Our products are acclaimed for high performance and ensure their adherence with the industry standards.
Request
Callback
Send Business Enquiry

Cu-Ni Condenser Tube

Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
  • Cu-Ni Condenser Tube
Get Best Quote
Approx. Price: Rs 15,000 / UnitGet Latest Price
Product Brochure

Product Details:

Part TypeCondenser Tubes
Body MaterialCopper
Exchanger TypeShell & Tube
BrandOmeel Coils
I Deal InNew Only
Tube Diameter5 Inch
Length3 Feet
Pipe Diameter3/4 Inch

Shell and Tube Heat Exchangers are a simple but effective type of heat exchanger, consisting of a cylindrical shell which contains a bundle of tubes. In most applications the hot fluid flows over the outside of the tubes and the coolant flows through the tube exchanging the heat between the thermally conductive materials used in the heat exchanger design.

Every effort is put in to providing the optimum design of heat exchanger for our client’s conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution. Our Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas, gas to gas applications.

Heat Exchangers in this category include:

Evaporators                                  

DX/Dry Chiller

Flooded Chiller

Condenser

Oil Cooler

Removable Tube Bundle

Heat Exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger’s materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead time and compatibility with further orders and re-builds.

Materials: -

Only quality materials from reputed suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tube, and tube plates. Materials selection is subject to operating parameters and conditions of use.

Additional Services: -

Our workshop staff has many years of experience in the manufacturing and re-building of Heat Exchangers.

Quality: -

Omeel Coils Pvt Ltd unit are supplied with full material certification and are pressure tested at our workshop. Heat Exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing.
Request
Callback
Send Business Enquiry

Ms Shell And Tube Heat Exchanger

Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
  • Ms Shell And Tube Heat Exchanger
Get Best Quote
Approx. Price: Rs 55,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
MaterialMild Steel
Heat Transfer TypeCondensers
Usage/ApplicationFor Food Processing Industry
Flow TypeParallel Flow
Medium UsedWater, Air
Power SourceElectric
Voltage380 Volt
PhaseThree Phase

PRODUCT DESCRIPTION

Omeel Coils Pvt. Ltd Shell & Tube heat exchangers are widely used for liquid to liquid and liquid to gas applications such as oil cooling, condensing, jacket water or gas cooling.

MATERIALS

Only quality materials from reputable suppliers are used in the construction of these Heat Exchangers. We carry a large range of stock tubes, and tube plates. Material selection is subject to operating parameters and conditions of use.

CONDENSER | EVAPORATORS | OIL COOLERS | COMPRESSOR COOLERS

Every effort is put in to providing the optimum design of heat exchanger for our client's conditions taking in to account the performance requirements, environment, safety, material selection and required service life. Our design staff is very experienced and has skill to providing the best & sustainable solution.

 

Heat exchanger size is calculated to achieve optimum flow regimes in relation to heat transfer, low fouling and scaling. Heat exchanger's materials are carefully selected so as to minimize erosion and wherever possible we try to use materials that are readily available in standard sizes for short lead times and compatibility with further orders and re-builds.

 

ADDITIONAL SERVICES

Our workshop staff has over 12 years of experience in the manufacturing and re-building of Heat Exchangers and we have the ability to clean, test, repair and re-building/re-tube Shell and Tube Heat exchangers.

 

QUALITY :

All units are supplied with full material certification and are pressure tested at our workshop. Heat exchangers are manufactured using proven techniques and inspected regularly throughout manufacturing. We can arrange for third party inspection/witness from most of the internationally recognized independent classification societies.

 

Whether your need is for a custom designed Shell & Tube Heat Exchanger, de-scale and test, repair or re-tube then just contact us and we'll be pleased to help.

Request
Callback


Additional Information:

  • Production Capacity: 15
  • Delivery Time: 3 to 4 Days
  • Packaging Details: As Per Customer Required
Send Business Enquiry

Shell & Tube Compressor Cooler Heat Exchangers

Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
  • Shell & Tube Compressor Cooler 	Heat Exchangers
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationHydraulic and Industrial Process
MaterialCopper, Aluminum
BrandOmeel coils
Flow RateNormal
SizeCustomizable
ColorAs per need

We, Omeel coils offers wide range of shell and tube compressor coolers that are used for various applications by many of our clients. It provides high performance with low maintenance and saves energy. We made this products using international quality standards with premium quality of raw material to meet the customer's satisfaction.
Request
Callback
Send Business Enquiry
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Omeel Coils (Sales Coordinator)
Omeel Coils
Plot No. 18, 19 & 20, Near Kim Chokdi, Opposite Bhagyoday Hotel, National Highway No. 08, Village Pipodara, Tal. Mangrol
Surat - 394110, Gujarat, India
Get Directions


Call Us


Send E-mail